Gear reduction electric motor is a common mechanical device, mainly used in the transmission of power and movement of the mechanism, widely used in transportation, transportation, printing, packaging and other industries.The 1 hp gear reduction electric motor means that its output power is 1 HP (750W), so what should its speed be?
First, it needs to be clear that the speed of the gear reduction electric motor depends on the input power and reduction ratio.The larger the input power, the smaller the deceleration ratio, the higher the output speed;Conversely, the smaller the input power, the greater the deceleration ratio, the lower the output speed.
In the case of a 1 hp gear reduction electric motor, assuming that the input power is 1 HP (750 watts) and the reduction ratio is 10:1, the output speed should be 1/10 of the original speed.If the original speed is 3000 RPM, the decelerated speed should be 300 RPM.
YUSIN 1 hp gear reduction electric motor is a four-stage motor, speed: 1400/1700rpm.In practical application, it is necessary to consider the torque, noise, life and other aspects of the reducer motor.Because the deceleration mode and deceleration ratio used by different types of deceleration motors are not the same.Therefore, in the selection and use of reduction motors, need to be based on specific needs for comprehensive consideration and evaluation.
